Teac TD-240A - 5-10．Hold Mode

5.SETTING OF FUNCTIONS
45
5-10. Hold Mode
The TD-240A provides the Peak Hold function to hold and display the peak value
（maximum value） of the input signal, and the Sample Hold function to hold and display
an optional point.
1) Select setting mode 2.
2)
Select hold mode.
Use and keys to set the hold mode, then use key
to validate the setting.
To return to the indicated value display, press key.
FNC
SEL
DOWN
Press seven times.
ENT
UP
DOWN
ENT
ESC
Setting of Hold Mode
1 ： Peak Hold
0 ： Sample Hold
Hold Mode