Teac TD-240A - RS-232 C Host Commands

9.RS-232C INTERFACE（TD-2404）
70
・Command (host → TD-240A)
Hold
Hold Reset
Digital Zero
Digital Zero Reset
Print Instruction
2. Communication Mode 1
This mode will continuously transmit the indicated values.
3. Communication Mode 2
This mode will transmit when the indicated value is printed.
CR
CR
CR
CR
CR
Ｃ
Ｃ
Ｃ
Ｃ
Ｃ
Ｅ
Ｆ
Ｇ
Ｈ
Ｉ
(This is effective only when the calibration
(This will issue print a command
value LOCK is "1.")
(This is effective only when the calibration
value LOCK is "1.")
onto SIF.)
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
G S ， 1 ， 2 ， 3 ， 4 ， ±
****
CR LF
HEADER
Five digits of the indicated
Sign
＋ or －
value and decimal point
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
G S ， 1 ， 2 ， 3 ， 4 ， ±
****
CR LF
HEADER
Five digits of the indicated
Sign
＋ or －
value and decimal point