TEC MA-1650-4 Series - Page 146

- 143 -
EO3-11070
MA-1650-4 SERIES
G R O C E R Y P L U G P 1
G R O C E R Y P L U G P 2
(1 to 99)
Repeat for other groups
(max. 99 groups)
➤
➤
➤
➤
➤
*
* (For sequentially programming Group Codes
and Names, the code number specification
can be skipped.)
(See NOTE)
➤
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
11-14-1994 MON #1
P29
01 GROCERY PLU GP 1
02 GROCERY PLU GP 2
0061
NOTE: A maximum of 16 regular-sized characters may be set for each PLU Group name. One double-sized
character occupies two regular-sized characters’ space. Also see the CHARACTER ENTRIES at the
beginning of this chapter. If no name is programmed for a PLU Group, an auto-preset data is assigned
as the PLU Group Name (PLU GPxx; xx = PLU Group Code 01 to 99).
ex.) To program the following names to the respective PLU Groups:
PLU Group 1
PLU Group 2
Key Operation Mode Lock: SET, enter 29, depress [X].
1 [ST] (PLU Group Code)
407 [#] 502 [#] 415 [#] 403 [#] 405 [#] 502 [#] 509 [#] [#]
500 [#] 412 [#] 505 [#] [#] 407 [#] 500 [#] [#] 301 [#]
[ST] (Name: GROCERY PLU GP 1)
2 [ST] (PLU Group Code)
407 [#] 502 [#] 415 [#] 403 [#] 405 [#] 502 [#] 509[#] [#]
500 [#] 412 [#] 505 [#] [#] 407 [#] 500 [#] [#] 302 [#]
[ST] (Name: GROCERY PLU GP 2)
[AT/TL] (to complete this submode)
PLU GROUP NAME PROGRAMMING (Submode 29)
This submode programs the name of each PLU Group. Which PLUs are linked to which PLU Groups has already
been set in the PLU TABLE PROGRAMMING operation, Submode 4.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
29 [X] |PLU Group Code| [ST] Character Entries [ST] [AT/TL]