- 144 -
EO3-11070
MA-1650-4 SERIES
The messages shown on the table below are initially programmed for comment messages.
Message Initial Program Remarks
Code
1 X| | | | | | | | | | | | | | | | | | | | | | | : Character Code 155
2
-- vacant --
3 A|U|T|H|O|R|I|Z|A|T|I|O|N| |N|O|.| | | | | | |
4 D|E|C|L|I|N|E|D| | | | | | | | | | | | | | | |
5 C|A|N|C|E|L|L|E|D| | | | | | | | | | | | | | |
6 A|P|P|R|O|V|E|D| | | | | | | | | | | | | | | |
7 R|E|F|E|R|E|N|C|E| |N|O|.| | | | | | | | | | |
8 E|B|T| |B|A|L|A|N|C|E|S| | | | | | | | | | | |
9 I|N|T|E|R|F|A|C|E| |F|A|I|L| | | | | | | | | |
10
S
|
T
|
O
|
R
|
E
||
C
|
O
|
P
|
Y
| | | | |
Repeat for another comment message (max. 10 messages)
* (For sequentially programming Message Codes and Messages, the code
specification can be skipped.)
➤
COMMENT MESSAGE PROGRAMMING (Submode 30)
Applicable on V1.9 or after
This submode programs various 10 comment messages.
CONDITION Any time outside a sale
OPERATION Mode Lock: SET
30 [X] |Message Code| [ST] Character Entries [ST] [AT/TL]
(1 to 10)
➤
➤
(Max. 24 characters for
each message)
➤
➤
*
To Next Page
Loading...
