To Next Page

To Previous Page

- 16 -

EO3-11070

MA-1650-4 SERIES

TERMINAL ID SETTING (Submode 77)

This submode is available for in-line terminals (including the master and backup master terminals). It must be

operated separately on each terminal since the Terminal ID should vary from terminal to terminal. The data set

in this submode is used as the in-line address of the terminal for in-line service operations.

CONDITION Any time outside a sale

OPERATION Mode Lock: SET

77 [X] |Terminal ID No.| [AT/TL]

Assign No. of 1 to 16.

1: Master

2: Backup Master

3 to 16: Satellites

➤

TEC STORE

1343 PEACH DRIVE

PHONE : 87-6437

Open 8:00am to 7:00pm

Closed: every Wednesday

12-19-1994 MON #1

P77

0011 14:16TM

ex.) To assign Terminal ID No. 4 to the terminal used as a Satellite

Terminal of the in-line system:

Mode Lock: SET, enter 77, depress [X].

Enter 4, depress [AT/TL]

NOTE: Be certain not to set the same terminal ID No. to terminals on the

in-line system.

If terminals with the same ID No. exist on the in-line system,

malfunction may occur.

At this time, it is necessary to execute the status clear for all the

terminals on the in-line system.

TEC MA-1650-4 Series User Manual

Questions and Answers: