- 81 -
EO3-11070
MA-1650-4 SERIES
Address No. Description of Programming Contents
➤
➤
-- Continued --
(1) Enter 0 for linking neither Major nor Minor Groups (the preceding zeros may be
omitted).
NOTE: The “Major Group” and “Minor Group” here are merely namings for those two
grouping total memories. In the memory process, those two totals are
independent from the other and no logical check is made for a combination
of the Major and Minor group codes to be linked to each department. In other
words, you may regard then as “A” grouping and “B” grouping. See the
examples below:
Major-Minor Grouping Method Example:
(In this case, you should check the logical linkage between the Major Groups
and Minor Groups.)
Major GP 01 Major GP 02
Minor Minor Minor Minor Minor
GP 01 GP 02 GP 03 GP 04 GP 05
DP01 DP02 DP04 DP06 DP07 DP10 DP11 DP14 DP16
0101 0101 0102 0103 0103 0204 0204 0205 0205
Linked Group Code in setting
“A” Grouping and “B” Grouping Method Example:
(In this case, you may think that each department data are processed into max.
2 different types of groupings.)
A-GP A-GP A-GP B-GP B-GP B-GP
01 02 03 01 02 03
DP01 DP02 DP04 DP06 DP07 DP10 DP11 DP14 DP16 DP17
0100 0100 0201 0301 0300 0302 0002 0003 0003 0002
Linked Group Code in setting
2 Department Name (Descriptor)
Enter a maximum of 16 regular-sized or 8 double-sized characters. See the
CHARACTER ENTRIES, at the beginning of this chapter. End with [ST].
When no name is programmed for a department, the following will be the auto-
program name (default value) for printing:
D P xx
Department Code 01 to 99
Double-sized characters
-- Continued on next page --
To Next Page
Loading...
