- 82 -
EO3-11070
MA-1650-4 SERIES
Address No. Description of Programming Contents
Status Item Selective Status
Code OFF ON
1 Itemized or Single-item Itemized Single-item
2 Ordinary or Other Income Dept. Ordinary Other Income
3 Positive or Negative Dept. Positive Negative
4 Food Stamp (or GST) Applicable No Yes
5 Scale Entry Prohibited Allowed
6 Department for Gasoline Sales? No Yes
7 Validation Compulsory No Yes
NOTE: Itemized, Single-item:
Refer to DEPARTMENT KEY description in the Owner’s Manual
(stand-alone level).
When Status Code 6 is set to ON (for Gasoline Sales), be sure to set a
preset price in Address 3.
Status Code 5 (Scale Allowed) and 6 (Gasoline Sales) cannot be set to
ON simultaneously for one department
-- Continued on next page --
-- Continued --
3 Preset Price
• For a preset department (preset-price department), enter a maximum of 6-
digit price, and depress [#].
1 to 999999 (result: $0.01 to $9999.99)
When the option “Preset Point for one decimal digit allowed” is selected, the
decimal digit can be entered after entering a maximum of 5 integer digits and
[•] key.
1 to 99999 (result: $0.01 to $999.99)
or
0.1 to 99999.9 (result: $0.001 to $999.999)
• A zero-price ($0.00) may be preset by entering 0 in the above operation.
• When no numerics are entered and the [#] key is simply depressed, the
department will be an open department (open-price department).
• For a department handling gasoline, set the preset price per gallon (max.
999.999 = 999 dollars 99.9 cents can be preset).
Be certain to enter the amount less than cent when programming the preset
price of gasoline.
ex.) To set the preset price of $1.25, enter the numeric value of 1250.
4 Status 1 Selection
• Enter the Status Codes 1 to 7 whose status must be set to ON side. More than
one code may be entered. Enter 0 when none of the statuses should be set
to ON.
To Next Page
Loading...
