3. DIAGNOSTIC TEST OPERATION EO18-11006A
3.4 ROM Test
3- 4
3.4 ROM Test
(1) Contents
A ROM test is performed. This test automatically prints the checksum of the ROM.
(2) Operation
Mode Lock: BLIND
Key Operation: 80 [X] (or [@/FOR]) 3 [AT/TL]
(3) Print Format
(4) Display
No function
(5) Quit
The receipt is issued, then the test ends automatically.
NOTE: In the Receipt OFF mode, the print data is printed only on the journal.
10-31-2005 MON #0
P80
DIAG 03
MA-600-QP V.999.999 #00Z
BOOT SUM V.999.999 9999
OS/APL SUM 9999
ALL SUM 9999
Copyright(C) 2005
TOSHIBA TEC CORPORATION
All Rights Reserved.
0006 15:42TM
Model name, Program version, ROM version
Boot area: Version, Checksum 000000H to 00FFFFH
OS/APL area: Checksum 010000H to 1FFFFFH
To Next Page
Loading...
Need help?
General
