1. UNPACKING EO18-11006A
1.1 Procedure
1- 1
1. UNPACKING
1.1 Procedure
CAUTION!
1. When newly setting up the MA-600, plug the power cord to charge the ECR for 48 hours or more.
2. When using the MA-600 not electrified for 1 month or more, plug the power cord to charge the ECR
for 48 hours or more and then perform a RAM clear, resulting that the ECR performs normally.
1) Open the carton.
2) Take the accessories out of the carton.
3) Take out the ECR and remove the pads.
4) Place the ECR on a level surface.
1.2 Checks
1) Check for the damage or scratches on the machine.
2) Confirm that none of the accessories are missing.
NOTE: Keep that original cartons and pads for future transportation of the ECR.
To Next Page
Loading...
Need help?
General
