3. DIAGNOSTIC TEST OPERATION EO18-11006A
3.15 Key Input Count Reading
3-15
3.15 Key Input Count Reading
(1) Contents
A key input count reading is performed. The key input counts for the Numeric keys, department keys,
[AT/TL], and the other keys are printed on the receipt.
(2) Operation
Mode Lock: BLIND
Key Operation: 96 [X] (or [@/FOR]) [AT/TL] (to perform the key input count reading)
96 [X] (or [@/FOR]) 0 [AT/TL] (to clear all key input count)
(3) Print format
(4) Display
No function
(5) Quit
The receipt is issued, then the test ends automatically.
NOTES:
1. The key input count is not cleared even if a RAM Clear or DATA clear is performed.
2. Neither the [RF] key input nor the [JF] key input is counted.
3. In the Receipt OFF mode, the print data is printed only on the journal.
10-31-2005 MON #0
P96
NUM KEY ZZZZZZZZZ9
DP KEY ZZZZZZZZZ9
AT/TL KEY ZZZZZZZZZ9
OTHER KEY ZZZZZZZZZ9
0018 15:54TM
Store Name Logo
The numeric value 0 is printed
when performing a clear operation.
To Next Page
Loading...
Need help?
General
