3. DIAGNOSTIC TEST OPERATION EO18-11006A
3.8 USB Test
3- 8
3.8 USB Test
(1) Contents
A USB connection test is performed. Before starting the test, connect a PC to the ECR with a USB cable.
(2) Operation
Mode Lock: BLIND
Key Operation: 80 [X] (or [@/FOR]) 13 [AT/TL]
(3) Print format
(4) Display
No function
(5) Quit
The receipt is issued, then the test ends automatically.
NOTE: In the Receipt OFF mode, the print data is printed only on the journal.
10-31-2005 MON #0
P80
DIAG 13
USB CONNECT OK
0010 15:46TM
Store Name Logo
OK: Normal connection
NG: Error
To Next Page
Loading...
