3. DIAGNOSTIC TEST OPERATION EO18-11006A
3.17 General Test
3-18
RAM Installation Test
USB Test
RS-232C Loop Back Test
Test End
(3) Print format
(4) Quit
The receipt is issued, then the test ends automatically.
NOTES:
1. In the Receipt OFF mode, the print data is printed only on the journal.
2. When the drawer 2 is not connected, press the [ST] key then the [ST] or [ITEM CORR] key to enter the test
result of the drawer 1.
3. For the display test, enter the test result twice to confirm the lighting of all dots and segments and the
scrolling display. The test results are processed at the time of the second entry.
10-31-2005 MON #0
P80
DIAG 92
HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
:
HHHHHHHHHHHHHHHH
:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰‰
################################
:
#1 PRINT OK
#2 DISPLAY OK
#3 ROM
MA-600-QP V.999.999 #00Z
BOOT SUM V.999.999 9999
OS/APL SUM 9999
ALL SUM 9999
#4 KEY OK
#5 DRAWER OK
#6 RAM OK
#7 USB CONNECT OK
#8 RS-232C ZZZ9/ZZZ9 OK
0020 15:57TM
#6 RAM
#7 USB
#8 RS-232C
To Next Page
Loading...
Need help?
General
