MediaGateway User Manual
MediaGateway UUID: Since version 4.1.12 the UUID is shown. This UUID is need for
activation of extra features.
MAC address: This MAC address should be the same as on the label on the bottom of
the device.
IP address: You can change the IP address of the host microcontroller (Webserver)
here. If you want to use multiple devices in one network, you must configure a unique
IP address for each device here.
Note: If you forgot the IP address of your device you can reset it to default as described
in C
HAPTER 2.2.2
3.4 Control Panel tab
3.4.1 Control panel
Figure 3-4: Control Panel tab
Restart target: Software reset. Configuration will NOT be lost.
Configuration: It shows the current configuration name.
Export: Save the stored configuration from MediaGateway into user’s PC.
Import: User can import or export the configuration settings of the device to a file
(*.cfg) on a computer connected to the RJ45 Port. A restart is needed to apply the new
configuration.
To Next Page
Loading...