MediaGateway User Manual
configured MAC address as destination MAC address will be dropped and forwarded
Note: This drop feature is only available if mirroring on this port is activated
3.6.3.4 100BASE-T1 Ports
Figure 3-27: 100BASE-T1 Ports
Port name: Here you can change the Port Name
Default VLAN ID (hex): please define one hexadecimal value between 0x1 and 0xFFF.
Incoming traffic is tagged with this value, if NOT already tagged! It is NOT overwriting
VLAN-IDs. This rule is valid for innerVLAN and outerVLAN!
VLAN membership: as many as wished values between 0x1 and 0xFFF can be defined
here separated by “,” [E.g.: 100, 101, EDF, …]. Outgoing traffic can leave the switch on
this port, if the data is tagged with one of the defined VLAN-IDs. Only outerVLANs are
checked!
Egress VID remarking: this must be defined for innerVLAN and outerVLAN separately.
To Next Page
Loading...
General