MediaGateway User Manual
Wake up functionality
CAN/LIN/FR interfaces (requires customer specific software)
Power output for attached devices (VBAT max. 1,2 Ampere in total [Fused])
Possibility to reset to default settings by pushbutton
Robust steel case
1.1.2 General Information
Voltage requirement: 7 to 16 Volt DC (nominal 12 Volt DC)
Power consumption: 7-12 Watt
Size: 195 x 143 x 33 mm
Weight: 0,77kg
International Protection: IP 2 0
Operating temperature: -40°Celsius to +80°Celsius
StartUp Time
The StartUp time is valid for HW-Variants 2.1a and higher, and Software 3.7 and higher.
If there is information needed about older variants of the MediaGateway, please
contact support@technica-engineering.de.
PowerUp and Processor Boot Time: 65
Configuration Time depending on complexity 47-55
100BASE-T1 LinkUp Time 20-130
Note: The RJ-45 GB-Ports need about 3-4 seconds linkup time due to Autonegotiation.
1.1.3 LINKS
The User can download the latest firmware and documentation for the MediaGateway
here:
https://technica-engineering.de/produkt/media-gateway/
To Next Page
Loading...