Technicolor DWA0120 User Manual

28
3Wi-Fi
DMS3-CTC-25-552 v1.0
3.2.1 Configuring WPA(2) PSK encryption
Procedure
Proceed as follows:
1 Browse to the DWA0120 web interface.
For more information, see “4.1.1 Accessing the DWA0120 web interface from your local network” on page 36.
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the Wi-Fi access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
 WPA2 PSK
This mode provides the highest security. Choose this version if you are sure that all your Wi-Fi clients support
WPA2 PSK.
 WPA+WPA 2 PSK
Choose this option if not all of your Wi-Fi clients support WPA2 PSK, or if you are not sure. Wi-Fi clients that support
WPA2 PSK will use WPA2 PSK, the others will use WPA PSK.
5 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
6 Click Save.
7 Reconnect your Wi-Fi client(s) to your DWA0120 using the new security settings.
For more information, see “3.1.1 Connecting to the Wi-Fi using WPS” on page 22 or “3.1.3 How to manually connect a Wi-Fi
client” on page 26.

Technicolor DWA0120 Specifications

General

Device Type	Gateway
Wireless Technology	Wi-Fi
Frequency Band	2.4 GHz
Maximum Data Rate	300 Mbps
Ethernet Ports	4 x 10/100 Mbps
Antenna	Internal
Wireless Standards	802.11 b/g/n
Security Features	WPA2
Ports	4 Ethernet, 1 USB