Technicolor DWA0120 - Scheduled Wi-Fi Control

29
3Wi-Fi
DMS3-CTC-25-552 v1.0
3.2.2 Configuring WPA-Enterprise encryption
Requirements
• A RADIUS server must be readily set up on your local network.
Procedure
Proceed as follows:
1 Browse to the DWA0120 web interface.
For more information, see “4.1.1 Accessing the DWA0120 web interface from your local network” on page 36.
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
 WPA2
 WPA+WPA2
5 The following RADIUS settings are now available for configuration:
 RADIUS Authentication Server's IP: enter the IP address of your RADIUS server.
 RADIUS Authentication Server's port: enter the WPA RADIUS Port.
 RADIUS Authentication Server's secret: enter the WPA RADIUS Key.
6 Click Save to apply your changes.
7 Reconnect your Wi-Fi client(s) to your DWA0120.
For more information, see “3.1.3 How to manually connect a Wi-Fi client” on page 26.