Technicolor DWA0120 User Manual

63
5 Content and Printer Sharing
DMS3-CTC-25-552 v1.0
5.2 Printer sharing
Introduction
A DWA0120 USB port allows you to share your USB printer in your local network. This way everyone in your network can
use the same printer without having to buy a network printer.
Requirements
The Samba server must be enabled on the DWA0120 (this is the default setting).
For more information, see “Customizing the content sharing settings” on page 60.
Procedure
Proceed as follows:
1 Connect your USB printer to the DWA0120. For more information, “5.2.1 Connect your USB printer to the DWA0120” on
page 63.
2 Configure the printer sharing service on your DWA0120.
For more information, see “5.2.2 Enable printer sharing on your DWA0120” on page 64.
3 Install the printer on your computer.
For more information, see “5.2.3 Installing the printer on your computer” on page 65.
5.2.1 Connect your USB printer to the DWA0120
Plug the USB cable of your printer in (one of) the USB port(s) of your DWA0120.

Technicolor DWA0120 Specifications

General

Device Type	Gateway
Wireless Technology	Wi-Fi
Frequency Band	2.4 GHz
Maximum Data Rate	300 Mbps
Ethernet Ports	4 x 10/100 Mbps
Antenna	Internal
Wireless Standards	802.11 b/g/n
Security Features	WPA2
Ports	4 Ethernet, 1 USB