72
7 Support
DMS3-CTC-25-552 v1.0
2 In the Internet card header, make sure that the switch is in the position.
3 Click Internet and then click show advanced. Make sure that DHCP routed mode is selected.
4 Click Switch connection mode.
5 After a few minutes the Status should switch to Connected. If needed, click refresh data first.
DWA0120 unreachable
If you cannot access your DWA0120 via your web browser, you might consider a hardware reset as described in “7.4 Reset to
factory defaults” on page 76.
To Next Page
Loading...
