17
2 Setup
DMS3-CTC-25-221 v1.0
2 Within two minutes, press the WPS button on the TG234 access point (or TG234 repeater). Depending on your home
setup, this will one of the following:
A MediaAccess Xtream Gateway access point
A TG234 access point mode
A TG234 repeater.
3 The WPS LED on both devices starts blinking orange and then turns solid green as soon as the connection has been
established.
4 Wait one minute and then check the following LEDs on the TG234 station:
The Link Quality LED must be solid green or orange.
The Wireless LED must be solid green.
5 Your station is now connected to your access point (or your repeater). Your set-top box can now communicate over the
wireless video bridge.
< 2min.
MediaAccess Xtream Gateway
WPS
TG234 Station
WPS
< 2min.
TG234 Station
WPS
TG234 Access Point
WPS
< 2min.
TG234 Repeater
WPS
TG234 Station
WPS