41
4 The TG234 wireless access point
DMS3-CTC-25-221 v1.0
4.2.2 WPS PIN method (PIN)
Introduction
There are two ways to configure your wireless connection using WPS PIN method:
WPS PIN:
Used when you have got the PIN code that is used by other devices of your wireless connection.
WPS AP PIN:
Used when you want to configure your devices with the PIN code of the TG234.
WPS PIN
To configure the TG234 with the WPS PIN code of your wireless connection, proceed as follows:
1 Browse to the GUI main page.
2 On the Config menu, click Wireless.
3 Click the Advanced tab.
4 Select Configured from the WPS State list.
5 Enter the PIN code of your wireless connection in the WPS PIN box, and then click the WPS PIN button.
WPS AP PIN
To configure other devices with the WPS PIN code of the TG234, proceed as follows:
1 Browse to the GUI main page.
2 On the Config menu, click Wireless.
3 Click the Advanced tab.
4 Select Configured from the WPS State list.
5 Use the code in the WPS AP PIN box to configure the wireless settings of other devices.
For more information on how to browse to the TG234 GUI, see “3.1.1 Access the TG234 GUI” on page 20.
For more information on how to browse to the TG234 GUI, see “3.1.1 Access the TG234 GUI” on page 20.
Click Regenerate to refresh the WPS AP PIN code.
To Next Page
Loading...
Need help?
General
