38
4 The TG234 wireless access point
DMS3-CTC-25-221 v1.0
Troubleshooting
If you are having trouble connecting your devices via WPS, this may be caused by one of the following reasons:
WPS can not be correctly executed:
Configure your wireless manually. For more information, see “4.3 Connecting manually without WPS” on page 42.
Your devices are out of range:
If possible move your devices closer to each other or use a wireless repeater to extend the range of your wireless network.
Another device is interfering on the selected wireless channel:
Change the wireless channel of your TG234.
The wireless channel can be changed by simply restart your TG234.
You can also change the wireless channel on GUI. For more information, see “Change the wireless channel” on
page 48.
To Next Page
Loading...
Need help?
General
