21
2 Setting up your TG589vac
DMS3-CTC-25-226 v1.0. Copyright © 2016 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
2 Click the Mobile 3G/4G card header.
3 The Mobile 3G/4G page appears. Click the Configuration tab.
4 Under Mobile Configuration, update the following fields if necessary:
APN:
Enter the Access Point Name (APN) of your service provider.
Operator Mode:
We recommend you to use the default setting, Automatic (let the TG589vac choose the best operator mode), unless
your service provider instructed you to select another mode.
PIN:
The PIN code of your SIM card.
5 Under Network Authentication, provide the username and password provided by your service provider.
6 Click Save and then click Connect.
7 The mobile connection is now up, but will not be used for Internet access unless your main Internet connection goes
down. Your main connection is always the preferred connection to the Internet.
This information should be provided by your service provider.
If your service provider did not provide a user name and password, then leave the Username and Password box
empty. In this case authentication is not required.
To Next Page
Loading...
