Technics SA-DX930 User Manual

Digital connection
Coaxial cable (not included) Optica! fiber cable (not included)
c TII—————— — — ——4ÀUIL t» «cic
CD player (or CD changer) Satelite receiver, etc.
(not included) (not included)
DIGITAL
OUT
XP.
TM
^N
~
dw
$
ase
à
C
*
MEM
B90
E
K
|
)
DIGITAL OUT
DVD player (not included)
Dolby Digital RF (radio frequency} signals cannot be decoded with
this unit even if a unit that has Dolby Digital RF output terminals is
connected to this unit.
è Do not bend the optical fiber cable.
e |f the digita! optical connector is not going to be used, be sure to
attach the dust-protection cap to prevent exposure to dust. HM
ROT4918

Technics SA-DX930 Specifications

General

Impedance	8 ohms
Weight	11.5 kg
Video Connections	Composite video input/output
Power Output	100 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD)
Total Harmonic Distortion	0.09%
Input Sensitivity	200mV
Tuning Range	FM, MW
Speaker Load Impedance	8 ohms
Input Sensitivity/Impedance	200 mV / 47k ohms (CD)