Technics SA-DX930

Using the remote control
To operate the receiver
Point the remote control
toward the receiver
XQ
o0 OO
1
(9
OO
T OQ)
O00
CORO: O10
c
m pu
<
m
< m
|
w
OO
2
£
>
2.8.58
OO OD
TVNIDEO ”
OK)
Q Q
MUTING —— VOL +
Basic operations
To turn the unit
ON/OFF
To select an input
source and switch the
remote control
to each operation
mode
To turn on the
STEREO mode
To turn on the
SURROUND mode
To turn SFC on and
select the mode
To output a test signal
To select the speaker
channel and adjust its
output level
Once the unit has been set to ON, it can
o be turned ON and OFF simply by pressing
> id
ma
After turning the TV, VCR or DVD player ON or OFF, always press
[TUNER/BAND] before pressing [65] when turning the receiver
ON and OFF.
TUNER/
GOOS
TAPE VCR
@ PHONO can not be selected with this remote control.
e TAPE MONITOR cannot be controlled with the [TAPE] button.
Changes as follows each time the button
is pressed.
HALL — CLUB — LIVE — THEATER
SIM SURR (SIMULATED)
When the SURROUND mode is on
TEST
E
Press once more to stop the test signal.
When the SURROUND, DTS or SFC modes are on
LEVEL ` - 4
Os OO
| Note |
The last channel to be adjusted is remembered so you can adjust
it again without having to press [LEVEL].
To select the speaker
channel and adjust its
delay time
To mute the sound
level
To adjust the volume
level
When the SURROUND or SFC modes are on
DELAY — ý
Gs GOGG
mm |
The last channe! to be adjusted is remembered so you can adjust
it again without having to press [DELAY].
The message "MUTING ON NOW" runs
repeatedly from right to left across the display
as long as the muting function is on.
Press once more to retum to the original
volume.
Others, Remote control operations
|
RQT4918