Technics SA-DX930

RQT4918
To watch TV broadcasts
The procedures below are examples for when a TV and VCR are connected to the receiver as shown in this alp
This remote control transmitter is designed for use with a home theater system. If you press [TV] (or [VCR]) and [6 in succession, the TV
(or VCR) and receiver will be turned on and the selector on the receiver will change to TV/DSS (or VCR). Press [©] within 3 seconds of
pressing [TV] (or (VCR)).
To watch TV broadcasts
Point the remote Point the remote Point the remote control
contro! toward the control toward toward the TV
TV and the receiver the TV
Osos»
Switch ON the TV Set the TV/VIDEO
and the receiver. mode on the TV :
to "TV". Select the desired channel.
TVNIDEO
The receiver will
switch to TV/DSS
input.
If you allow more than 3 seconds to pass between pressing [TV] and (o ], only the TV will be
operated.
eam, = Do not use this remote control to turn the TV ON and OFF if you are not using the receiver.
PEA
E
=
To
watch
TV
broadcasts
with
a
VCR
tuner
Point the remote Point the remote control
control toward the TV toward the VCR and
and the receiver the receiver Set the input
VCR selector on
TV Ò
C5 w C5 w CE m CO Mirevert
the "TUNER"
Switch ON the TV Switch ON the VCR. position
and the receiver. . i
The receiver will switch
to VCR input.
Point the remote control toward the VCR !
Point the remote control
toward the TV
TVNIDEO
Set the TV/VIDEO
mode on the TV
Select
the
desired
channel.
to
"VIDEO".
If you allow more than 3 seconds to pass between pressing [VCR] and [Ó ], only the VCR will be
operated.
Do not use this remote control to turn the VCR ON and OFF if you are not using the receiver.
To switch OFF the TV To switch OFF ue VCR
TV
Ò
VCR
wa
(CD
=»
Cs
©
-
du
Turn
the
receiver
OFF
last.
SA-DX930 only
2IQENTER This button is used when using ENTER to select a channel on a TV or VCR
which has not been manufactured by this company.