Technics SA-DX930

Selected channel
. + . + . e * LJ * €" 9 s . 9 " . " * LI ð. * 9 è A > k b
FEN
7 UH
| ae eee i
HUT) HT LL.
s . LI + ^" * . *» * 9 òè 9 9 e L]
s * + « * * *. . . * " + .
med ta he BO)
ALT dC UL. a -
Enjoying sound modes
Adjusting field of sound in the SFC mode
by remote control only
With this unit, you can adjust speaker volume.
Adjust the field of sound while listening to a source.
To adjust the volume of each speakers EJ
Press [LEVEL] to select the speaker channel
to adjust.
The output level appears on the display.
Each time the button is subsequently pressed, the speaker
whose level is to be set is selected in the listed sequence.
C — RS — LS — SW
fis aa =
Speakers for which “NONE” or “OFF” has been set are
skipped.
Press [-] or [+] to adjust the output level.
Channels C, RS, LS, and SW can be adjusted between —10
dB and +10 dB.
To adjust the delay time of the surround speakers El
Press [DELAY].
Press [-] or [+] to adjust the delay time.
Select a delay time to suit your individual needs.
Delay time can be set at 10 milliseconds (ms) intervals
between 10 and 100 ms.
The factory settings for each mode are 50 ms.
For your reference
Settings for volume level and delay time can be done for each
SFC mode.