Technics SA-DX930

To operate a CD changer or CD player
Turn the CD changer (or CD player) ON before trying to operate it by remote control.
Make sure the remote control is in the CD player operation mode. (=> Page 33.)
It may not be possible to operate some CD players with this unit.
Point the remote
control toward the CD
changer (or CD player)
DD,
BA ND.
Coe
m P/P
> TAPE
=
DELAY LEVEL —
To start play
(CD changer only]
To start play from the
desired disc
To start play from the
desired track
To skip a track
To stop play
For 5 CD changer
5 = 38À
For MEGA C
Select disc number.
D changer *
5» S50 » ©
OÒ
Select the disc number.
(When selecting discs,
respond to touch.)
210/ENTER is 210 on SA-DX830.
[210/ENTER} does not
For your reference
OOO
BSS
Hida
if you press this button instead of [ » ] shown in the
above procedure, the CD changer will stop and
display the disc number. To start the disc, press
[ > j.
Select the track number.
(Example: Track 1}
1
O
2 (Example: Track 10)
24Q/ENTER 1
(Ow CC)
210/ENTER is 210 on SA-DX830.
x "MEGA CD changer" means any Technics CD changer that takes more than 50 discs.
lions
mote control operat
e
It
35
RQT4918