Technics SA-DX930 User Manual

| Listening to radio broadcasts
Preset tuning
Presetting radio stations into the memory channels of this unit
makes selecting stations simple.
A total of 30 FM and AM stations can be preset.
Please remember this
If a new broadcast station is preset into a channel, the setting for
the broadcast station which was previously entered in that channel
will be automatically erased.
Automatic memory presetting
Automatic memory presetting allows this unit to automatically
search for broadcast stations and then preset them into memory.
With this method, the channels that can be preset into the memory
are set as follows for different bands (FM or AM).
-SPEAKERS-
e
When FM stations are preset,
For FM stations .................. eese p RR NOH 1-30
When FM and AM stations are preset,
For FM stations ...............ccscccosssscerscessstessesssssssesscssstsseseccsreeeeseee 120
For AM stations oo... ccc cece scevesecveeserseeetseseeterssssertnes 21-30
[T Set to the frequency from which you want to
start automatic memory presetting.
(=> Page 20-21.)
Press [MEMORY] until the frequency begins
to change.
(Automatic memory presetting will start.)
During automatic memory presetting, the memory indicator
will flash while the frequency scrolls.
To stop, press [MEMORY] again.
|!
|
]
|
|
|
:
|
When a broadcast station is preset ZI
The memory indicator and the preset channel number will be
| displayed for approximately 1 second.
| When presetting is completed
| The last broadcast station to be preset will be displayed.
Frequencies may not be preset correctly in cases where the
broadcast waves are too strong or too weak. In such cases, carry
out presetting manually. (> Page 23.)
ROT491B^ "s uomen mote pda e teu c c Ae ee ers cd

Technics SA-DX930 Specifications

General

Impedance	8 ohms
Weight	11.5 kg
Video Connections	Composite video input/output
Power Output	100 watts per channel (8 ohms, 20 Hz - 20 kHz, 0.09% THD)
Total Harmonic Distortion	0.09%
Input Sensitivity	200mV
Tuning Range	FM, MW
Speaker Load Impedance	8 ohms
Input Sensitivity/Impedance	200 mV / 47k ohms (CD)