Technics SC-CH717 - Changing the Volume Level Mode; Changing the Output Level Display; Changing the Output Level Scale

(For SC-CH717 only)
I
DISPLAY RANGE
Changing the output level display Changing the output level scale
The display will change in 3 steps.
Select the desired display.
DISPLAY
Press DISPLAY.
Each time you press DISPLAY, the dis-
play will change as shown in the illus-
tration.
4 AMP
@
®
41AI.P _t
WATTS
LEFT RIGHT
METER
'nW _ 22
Change the output level scale of the source you are listening to.
RANGE
Press RANGE.
Each time you press RANGE, the display
will change as follows:
® -.,
I METER Xl I'_ "7
I u. _ _ u.c
€
WA'n's 1 _ 1 _,
t-t I "/ .E_E. xol n _7
ILl. _ _ U.L
(_) Shows the output level scale, up to
60 W max.
When the output level scale is more
than 60 W, "OVER" lights.
(_) Shows the output level scale, up to
6 W max.
When the output level scale is more
than 6 W, "OVER" lights.
You can change the output level scale only when the display shows
same as (T)and (_).
JEvbTt_
You can change the output level only when the display shows same
as Q and Q.
40