Technics SC-CH717 User Manual

_) (_ Press _1 or • to select the
desired source,
L
I-- 7"/ o.
-L .u- _L,,__=__ ......
/ i \
(_ Press SET,
When you select tuner, select a de-
sired preset channel using <1 or I_,
and then press SET.
Prepare for the play.
When you play a CD:
Load disc(s).
When you load two or three discs:
Press one of the disc buttons to select
which disc you want to play, and then
proceed to next step.
When you play a tape:
Load a tape.
POWER
STANDBY
o
Press POWER on the amplifier
to switch the power to standby
mode.
Please confirm [] PLAY appears on the
display. The timer play will start at the
preset time with volume increasing grad-
ually up to the volume level you preset.
r_t;Tt_J
When you play a CD in the program play
mode, the timer play may start directly
with the volume level you preset.
- #1-/. i t-t
I I_1. I 1.._€.
[_ PLAY
%
To cancel the timer:
Press [] PLAY to go out [] PLAY on the
display.
The play timer will not function, but the play timer setting wilt stay in
the memory.
CLOCK/
TIMER
%
To confirm the play timer:
Press CLOCK/TIMER to show [] PLAY
on the display.
17"1 I--I I f-I I I 4 =Ut_ CONT ROk
J
The display will show the ON time, OFF
time, the source you select, and the vol-
ume level in 2 second steps.
To change the play timer setting:
Follow the procedure from the first step,
Using the timer at the same time setting continu-
ously:
You can accomplish this even if the system is in the standby mode.
1. Press [] PLAY to show [] PLAY on the display.
2. Press POWER to switch the power to standby mode.
To enjoy the desired source after the timer setting
is completed:
1. Start playing the desired source.
Even if you change the volume level or sound source, the timer
play will start in the preset mode.
2. Press POWER to standby mode after enjoying the play.
aThis system retains the ON/OFF time settings until you make a new
setting, in case you make a new ON time setting which is later than
the previous OFF time setting, the system automatically advances
to the day you set on step 3. When you reset the OFF time, the day
setting will return to the original setting.
eThe ON time and OFF time cannot be identical.
• If the power is on, the timer will not function. The system must be in
the standby mode.
eThe play timer will function until you cancel the play timer mode.
• If you switch the power to standby mode while play timer is func-
tioning, the OFF time setting will be cancelled.
For your reference:
When you insert cassettes in both deck 1 and deck 2, deck 1 has
priority for timer play on tape.
If you make an error:
Follow the procedure from the first step.
About the variation of the day setting:
One day from Sunday to Saturday: SUN...SAT
Everyday from Sunday to Saturday: SUN-SAT
Everyday from Monday to Saturday: MON-SAT
Everyday from Monday to Friday: MON-FRI
Saturday and Sunday only: SUN, SAT
4?

Technics SC-CH717 Specifications