TechniSat DigitRadio 110 IR

11
EN
FR
IT
NL
PL
CZ
SK
2.7 Turning the Unit On/O
Connect the plug at the end of power adapter cable to the DC IN socket on the back of the unit. Then insert
the power adapter into the mains socket. Press buon on the unit or on the remote control to turn unit on or
standby. To switch the unit o completely, unplug the power adapter from the mains socket.
3 Unit Views
1. Remote control sensor 1. Optical Out socket
2. Display To connect an Optical cable.
2. Audio Out socket
To connect a RCA cable.
3. DC IN socket
4. Antenna socket
5. buon
Press to switch radio on or standby.