TechniSat DigitRadio 110 IR

31
EN
FR
IT
NL
PL
CZ
SK
8.7 Changing Station Order
You may want to display the stations in dierent order.
1. Press MENU buon, press or buon to select ‘Station order’, and then press OK buon to confirm.
2. Press or buon to select through ‘Alphanumeric’, ‘Ensemble’ or ‘Valid’, and then press OK buon
to confirm your selecting option.
Alphanumeric Display all stations in alphanumeric order.
Ensemble List currently broadcasting active stations before
inactive ones.
Valid Remove inactive stations from the station list.
8.8 Viewing Station Information
DAB/DAB+ stations broadcast additional information. Press INFO buon on the main unit repeatedly to view
information through DLS (Dynamic Label Segment), Ensemble, Program Frequency, Signal Quality, Signal
Strength, Bitrate, Codec, Channel and Date.
8.8.1 Showing Signal Strength
While you selected signal strength, a signal bar with the strength of the current station will show on the display.
The indicator on the signal bar shows the minimum acceptable signal level.
Note: Stations with signal strength below the minimum signal level may not provide a steady stream of audio.