TechniSat DIGITRADIO 580 User Manual

36
primary station (a “<<” symbol is before the name of the station) in the station list.
To select the secondary station, turn SCROLL/SELECT/SNOOZE knob until you find the secondary service you
want, then press SCROLL/SELECT/SNOOZE knob to select it.
When the secondary service ends, the unit will automatically switch back to the primary station.
8.3 Scanning Stations
Press MENU buon, turn SCROLL/SELECT/SNOOZE knob to select “Scan”, and then press SCROLL/SELECT/
SNOOZE knob to full scan.
8.4 Manual Tune
This can help you when adjusting your antenna or when adding stations that were missed while auto tuning.
1. Press MENU buon, turn SCROLL/SELECT/SNOOZE knob to select “Manual tune”, and then press SCROLL/
SELECT/SNOOZE knob to confirm, the display will show the channel number and frequency.
2. Turn SCROLL/SELECT/SNOOZE knob to select the channel you wanted, and then press SCROLL/SELECT/
SNOOZE knob to confirm.
Note: If there is a multiplex corresponding to this channel and frequency, then the display will show a
tuning meter with the signal strength and the multiplex name aer a few seconds. The new stations will be
added to station list automatically.
3. To play the station, first press BACK buon repeatedly to exit manual tune.
36

TechniSat DIGITRADIO 580 Specifications

General

Tuner type	Digital
FM band range	87.5 - 108 MHz
Supported radio bands	DAB+, FM
Preset stations quantity	20
Product color	Anthracite
PLL synthesizer	Yes
Package depth	301 mm
Package width	355 mm
Package height	228 mm
Package weight	4010 g
RMS rated power	20 W
Number of built-in speakers	10
Headphone outputs	1
Headphone connectivity	3.5 mm
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	-
Display type	OLED

Weight and Dimensions

Depth	214 mm
Width	240 mm
Height	146 mm
Weight	3000 g