4646
Mode: Alarm mode: Buzzer, Internet radio, DAB, FM or CD
(If the wake-up mode is DAB and the DAB signal
strength is low, or wake-up mode is CD and there
is no CD in the radio, the buzzer alarm will be
triggered.)
Preset: Last listened or saved preset station (not
available for Buzzer and CD mode).
Volume: Alarm volume
Save: Save the alarm
4. When the display shows “Alarm Saved”, the alarm seing is successful. or will show on the display.
5. To temporarily switch o alarm, press SCROLL/SELECT/SNOOZE knob repeatedly to set snooze time for 5,
10, 15 or 30 minutes in turn. The unit will go to standby and snooze time will show on the display.
6. To turn o alarm, press ALARM uon when the alarm sounds.
7. To cancel Alarm, refer to steps1-3 to enable alarm “O”. or will disappear from display.
13.3 Seing Equaliser
This feature enables you to choose a sound equalization profile. Each of the equalization seing will change the
tone of the sound from your radio when selected.
1. Press MENU buon > Main menu > System seings > Equaliser, and then press SCROLL/SELECT/SNOOZE
knob to confirm.
2. Turn SCROLL/SELECT/SNOOZE knob and then press it to select a profile. The equalization profile options:
Normal/Jazz/Rock/Movie/Classic/Pop/News/My EQ/My EQ profile setup.
3. To set up My EQ, select ‚My EQ profile setup ‚, and then press SCROLL/SELECT/SNOOZE knob to confirm.
Turn SCROLL/SELECT/SNOOZE knob to select ‘Bass’, ‘Treble’ or ‘Loudness’, and then press SCROLL/SELECT/
SNOOZE knob to confirm. Turn SCROLL/SELECT/SNOOZE knob to change the value of Bass, Treble or
Loudness, and then press SCROLL/SELECT/SNOOZE knob to confirm. Press BACK buon, display will show
‘Save changes’. Turn and press SCROLL/SELECT/SNOOZE knob to select ‘YES’ to save changes.
To Next Page
Loading...
