TECHTOP TD350 - Page 180

TD350 Series VFD Function parameter list
-175-
Function
code
Name
Detailed parameter description
Default
value
Modify
54: PLC card customized fault 10 (P-E10)
55: Repetitive extension card type fault (E-Err)
56: Encoder UVW loss fault (ENCUV)
57: Profibus communication fault (E-PN)
58: CANopen communication fault (ESCAN)
59: Motor over-temperature fault (OT)
60: Card slot 1 card identification failure (F1-Er)
61: Card slot 2 card identification failure (F2-Er)
62: Card slot 3 card identification failure (F3-Er)
63: Card slot 1 card communication timeout fault
(C1-Er)
64: Card slot 2 card communication timeout fault
(C2-Er)
65: Card slot 3 card communication timeout fault
(C3-Er)
66: EtherCAT communication fault (E-CAT)
67: Bacnet communication fault (E-BAC)
68: DeviceNet communication fault (E-DEV)
69: Master-slave synchronous CAN slave fault
(S-Err)
72: Ethernet IP communication timeout fault (E-EIP)
P07.33
Running frequency of present fault
0.00Hz
●
P07.34
Ramps reference frequency of present fault
0.00Hz
●
P07.35
Output voltage of present fault
0V
●
P07.36
Output current of present fault
0.0A
●
P07.37
Bus voltage of present fault
0.0V
●
P07.38
Max. temperature of present fault
0.0°C
●
P07.39
Input terminal state of present fault
0
●
P07.40
Output terminal state of present fault
0
●
P07.41
Running frequency of the last fault
0.00Hz
●
P07.42
Ramps reference frequency of the last fault
0.00Hz
●
P07.43
Output voltage of the last fault
0V
●
P07.44
Output current of the last fault
0.0A
●
P07.45
Bus voltage of the last fault
0.0V
●
P07.46
Max. temperature of the last fault
0.0°C
●
P07.47
Input terminal state of the last fault
0
●
P07.48
Output terminal state of the last fault
0
●
P07.49
Running frequency of the last but one fault
0.00Hz
●