Tecme NEUMOVENT - Clock Adjustment

TECHNICAL AND MAINTENANCE MANUAL
Graph VENTILATOR
Review : 04
Date:
09/05/06
72
Procedure for Initial Calibration and Setup
Neumovent Graph Ventilator
Operation
Description
30
Clock Adjustment:
-To
changes the date and hours values:
a-
Select the desired option with the “Selection” key
b-
Press “enter” to enter and modify the values with “Selection” key
c-
Press “enter” to exit.
-If the changes are ready
Press “Menú” and the next message will be displayed on the screen:
SAVE
EXIT
Select the desired option with the
“Selection” key and press “Enter”.
-If you select
EXIT and the values was modified;
the next message will be displayed on
the screen
:
¿Exit without save changes?
[ Enter ] Accept
[ Reset ] Cancel
Select the desired option
Then, press
“Reset”to return to initial menu.