TECO E510s Series - Application Functions

4- 245
4.4.3 Application functions
1. Counter Function
 Counter mode (1 ~ 4)

UP/Down counting modes can be set by (I1 ~ f8).
OFF: Count up (0, 1, 2, 3…)
ON: Count down (…3,2,1,0)

Use (I1~f8) to reset counting value
ON: Internal count value is reset and counter output  is OFF
OFF: Internal counter value retained
 Internal counter value
 Counter compare value (AS1~AS4,MD1~MD4,T1~T8,C1~C8,V1~V7,constant)
 Counter output (C1 to C8, there are a total of 8 counters)
Counter modes：
Mode 1： Counter value is locked to the set value.
The value will not be retained when the power is cut off.
Mode 2： Counter value is not locked.
The value will not be retained when the power is cut off.
Mode 3： Counter value is locked.
The value will be retained when the power is cut off.
Mode 4： Counter value is not locked.
The value will be retained when the power is cut off.
(1) Counter mode 1