4-9
4.1.6 LCD keypad
LCD display (JN5-OP-A02) built-in internal memory can upload or download from one inverter to
another one, please refer the functions of LCD keypad.
Fref Ref
12-16=005.00Hz
Monitor
12-17=000.00Hz
12-18=0000.0A
Figure 4.1.6.1 LCD display
LED indicators for inverter status
FAULT：
FWD：
REV：
SEQ：
REF：
LED on when a fault or alarm is active.
LED on when inverter is running or forward
LED on when inverter is running or reverse
LED on when run command is from the
external control or communication
LED on when frequency reference command
is from external control or communication
LCD display ( 8 lines x 25 letters)
◎ Display the monitoring value and parameter setting
◎ Mode display (display on upper left of screen)
Monitor：
Group：
PARA：
Edit：
Displayed at drive mode
Displayed at mode setting
Displayed at parameter setting mode
Displayed at edit or auto-tune mode
Function keys (please refer to LED keypad)
To Next Page
Loading...
