TECO E510s Series - Programming Mode

4-12
4.1.9 Programming Mode
In programming mode inverter can be read or changed. Please refer Fig.4.1.9.1。
Power ON
DSP
FUN
READ
ENTER
READ
ENTER
READ
ENTER
READ
ENTER
21
A
B
To parameters
Monitor
Freq Ref
12-17=000.00Hz
12-18=000.00Hz
12-16=000.00Hz
Control Method
Edit 00-00
0V/F
(0~4)
<0>
Motor Direction
0Forward
(0~1)
<0>
Run Source
0Digital Op
(0~4)
<1>
DSP
FUN
DSP
FUN
DSP
FUN
READ
ENTER
DSP
FUN
READ
ENTER
DSP
FUN
Edit 00-01
Edit 00-02
DSP
FUN
DSP
FUN
DSP
FUN
Group
01 V/F Pattern
02 Motor Parameter
00 Basic Fun.
Group
02 Motor Parameter
00 Basic Fun.
01 V/F Pattern
Group
00 Basic Fun.
01 V/F Pattern
02 Motor Parameter
PARA 00
-00 Control Method
-01 Motor Direction
-02 Run Source
PARA 00
-00 Control Method
-01 Motor Direction
-02 Run Source
PARA 00
-00 Control Method
-01 Motor Direction
-02 Run Source
<
RESET
Monitoring Mode
Parameter Group
Selection Mode
Parameter
Group Mode
Parameter
Edit Mode
Fig.4.1.9.1 Programming Mode
Notes：
(1) The parameters value can be changed from the edit screen with the function keys.
(2) To save a parameter press the READ/ENTER key.
(3) Refer to section 4.3 for parameter details.
(4) Press the ▲ (up) or ▼ (down) key to scroll parameter groups or parameter list.