TECO E510s Series - UL Standards Compliance


Appendix 1 Instructions for UL

AP1‐3

 UL Standards Compliance
This drive is tested in accordance with UL standard UL508C and complies with UL requirements. To ensure continued
compliance when using this drive in combination with other equipment, meet the following conditions:
 Installation Area
Do not install the drive to an area greater than pollution severity 2 (UL standard).
 Main Circuit Terminal Wiring
UL approval requires crimp terminals when wiring the drive’s main circuit terminals. Use crimping tools as
specified by the crimp terminal manufacturer. Teco recommends crimp terminals made by NICHIFU for the
insulation cap. The table below matches drives models with crimp terminals and insulation caps. Orders can be
placed with a Teco representative or directly with the Teco sales department.
Closed-Loop Crimp Terminal Size
Drive Model Wire Gauge mm2 (AWG) Terminal Crimp Terminal Tool Insulation
11-201(series) R/L1, S/L2, T/L3 U/T1, V/T2, W,T3 Screws Model No. Machine No. Model No.
11-201-20-2P5-00 2 (14) M3.5 R2-3.5 Nichifu NH 1/9 TIC 2
11-201-20-201-00 2 (14) M3.5 R2-3.5 Nichifu NH 1/9 TIC 2
11-201-20-202-00 3.5 (12) M4 R5.5-4 Nichifu NH 1/9 TIC 3.5
11-201-20-203-00 5.5 (10) M4 R5.5-4 Nichifu NH 1/9 TIC 5.5
11-201-23-202-00 3.5 (12) M4 R5.5-4 Nichifu NH 1/9 TIC 3.5
11-201-23-205-00 5.5 (10) M4 R5.5-4 Nichifu NH 1/9 TIC 5.5
11-201-23-208-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-23-210-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-23-215-00 22 (4) M6 R22-6 Nichifu NOP 60/150H TIC 22
11-201-23-220-00 22 (4) M6 R22-6 Nichifu NOP 60/150H TIC 22
11-201-23-225-00 22 (4) M6 R22-6 Nichifu NOP 60/150H TIC 22
11-201-23-230-00 60 (1/0) M8 R60-8 Nichifu NH 1/9 TIC 60
11-201-23-240-00 60 (1/0) M8 R60-8 Nichifu NH 1/9 TIC 60
11-201-43-401-00 2 (14) M3.5 R2-3.5 Nichifu NH 1/9 TIC 2
11-201-43-402-00 2 (14) M3.5 R2-3.5 Nichifu NH 1/9 TIC 2
11-201-43-403-00 2 (14) M4 R2-4 Nichifu NH 1/9 TIC 2
11-201-43-405-00 2 (14) M4 R2-4 Nichifu NH 1/9 TIC 2
11-201-43-408-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-43-410-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-43-415-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-43-420-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-43-425-00 8 (8) M4 R8-4 Nichifu NOP 60 TIC 8
11-201-43-430-00 14 (6) M6 R14-6 Nichifu NOP 60/150H TIC 14
11-201-43-440-00 38 (2) M8 R38-8 Nichifu NOP 60/150H TIC 38
11-201-43-450-00 38 (2) M8 R38-8 Nichifu NOP 60/150H TIC 38
11-201-43-460-00 38 (2) M8 R38-8 Nichifu NOP 60/150H TIC 38
11-201-43-475-00 38 (2) M8 R38-8 Nichifu NOP 60/150H TIC 38