5-157
EC906 Start angle of E-Cam
Initial Value Unit Setting Range Effective RS-485 Address
0 0.01 degree -9000 ~ 9000 Effective after Confirmed 0806H
Setting Description: When the flying shear function is selected, the synchronized angle refers to the
angle the auxiliary axle travels when the main axle and auxiliary axle shares the
same speed (Definition: 1 revolution = 360-degree).The definition is “the start
angle of the first tool touching the cutting point” - “the defined point of start
angle”. The defined point of start angle is 180-
/
and the setting range
is
~
. For example: if ECA04=3, then the defined point is
120-degree and the angle difference between the first tool and defined point is
the setting value of ECA06.
EC907 Encoder resolution of E-Cam main axle
Initial Value Unit Setting Range Effective RS-485 Address
2500 ppr 1 ~ 32768
Effective after Confirmed
0807H
Setting Description: Main axle (feeding axle) encoder resolution.The resolution of main/auxiliary
motor encoder. For incremental type, then input motor resolution; for
communication type, input resolution per rotation/4. For example, for
communication type 17bit motor, then input 131072/4=32768 in this parameter.
EC908 Encoder resolution of E-Cam auxiliary axle
Initial Value Unit Setting Range Effective RS-485 Address
2500 ppr 1 ~ 32768
Effective after Confirmed
0808H
Setting Description: Auxiliary axle (cutter axle) encoder resolution.
CUT point is the cutter position
120-degree between each tool
ECA06 Start angle
120 degree=Definition point
180 degree=Cutting point
0 degree
CUT point
CUT point
To Next Page
Loading...
