3-5
3-1-3 Function Selection Type Setting
Some parameters of this Device are displayed in Hexadecimal, if the highest digit of the setting screen
shows H, indicating that this parameter is set in Hexadecimal. Setting Example Description: Suppose
Pn317 (Return to Origin Mode Setting)=0212, then the Display Screen is
3-1-4 Value Type Setting
The Positive / Negative Values of this Device are displayed as follows:
Positive / Negative Sign Display Description
Positive Value
Display
Negative Value
Display
If the settable value range is less than or equal to 4 digits,
the highest digit will display a negative sign when the
negative value is displayed, for example,
Sn201
(Internal
Speed Command 1).
3000 -3000
If the settable range is equal to 5 digits, the decimal points
of all digits are ON when the negative value is displayed,
for example,
Pn401
(Internal Position Command 1-
Number of Revolutions).
30000 -30000
If the settable range is more than 5 digits, the Enter Key can
be used to switch between high and low digits, the decimal
points of all digits are ON when the negative value is
displayed, for example,
Pn402
(Internal Position Command
1 - Number of Pulses).
30000 -30000
Higher 5 Digits:
Lower 5 Digits:
Higher 5 Digits:
Lower 5 Digits:
300000 -300000
Higher 5 Digits:
Lower 5 Digits:
Higher 5 Digits:
Lower 5 Digits:
To Next Page
Loading...
