2-25
(3) CN1 Interface Circuit and Wiring Mode: (JSDG2S as an example)
The following will introduce the interface circuit of each CN1 contact and the connection method
with the Supervisory Controller.
(a) Digital Input Interface Circuit
(IO1)
:
The Digital Input Interface Circuit can be controlled by relay or open collector transistor circuit.
The relay needs to select a low-current relay to avoid poor contact. Use a maximum external voltage
up to 24V.
NPN Transistor,
(SINK Mode) using Internal Power Supply
NPN Transistor,
(SINK Mode) using External Power Supply
Servo Driver
Servo Driver
PNP Transistor, (SOURCE Mode) using
Internal Power Supply
PNP Transistor, (SOURCE Mode) using
External Power Supply
Servo Driver
Servo Driver
To Next Page
Loading...
