4-56
Example 4 & 5:
Auto Run Mode 06-00 =【1~3】. After a stop the inverter will start with the incomplete step when the run command
is re-applied.
Auto Run Mode 06-00 =【4~6】. After a stop the inverter will start with the first step of the cycle when the run
command is re-applied.
1 to 3
RUN STOP
RUN
Operation
Command
RUN STOP
RUN
t t
Output
Frequency
Operation
Command
Output
Frequency
Start new cycle
Continue with
incompleted step cycle
Output Frequency
06-00 4 to 606-00
ACC/DEC time in Auto run mode used is based on parameter 00-14/00-15 or 00-16/00-17.
For Auto sequence 0.Run frequency used is the keypad frequency set by parameter
05-01.Parameters 06-16 and 06-32 are used to set the sequence Run time and Run direction.
To Next Page
Loading...
