App 3-21
4. BACnet Object Properties
This section provides the predetermined configuration of the inverter. User can achieve the
optimizazed situation at any necessary modification.
Refer to Table 4.1 for the property information of inverter objects and user can learn the inverter
messages from the inverter objects.
Refer to Table 4.2 ~ Table 4.7 for the related object information that inverter supports. User can
control/ read each object with the application requirements.
Table 4.1 – Inverter property list
Property Inverter
Object_Identifier DEV
Object_Name VFD
Object_Type 8
System_Status 0
Vendor_Name TECO L510s
Vendor_ Identifier 461
Model_Name TECO.Inc
Firmware_Revision 0.14
Applocation_Software_Supported 0.14
Protocol_Version 1
Protocol_Revision 5
Protocol_Services_Supported { readProperty , writeProperty , who is }
Protocol_Object_Type_Supported
{ Analog_Input , Analog_Output, Analog_Value
Binary_ Input, Binary_Output, Binary_Value,
Device}
Max_Masters 127
Max_Info_Frames 1
Location R.O.C
To Next Page
Loading...
