TECO L510S Series - Page 57

4-12
Group 02- Motor parameters
No. Description Range
Factory
Setting
Unit Note
02-00
Motor No Load Current
----
by motor nameplate A
*4
02-01
Motor Rated Current (OL1) ---- by motor nameplate A *4
02-02 V/F Slip Compensation
0.0 ~ 100.0 0.0 % *1
02-03
Motor Rated Speed
----
by motor nameplate Rpm
*4
02-04
Motor Rated Voltage ---- by motor nameplate Vac
*4
02-05
Motor Rated Power 0~22.0 by motor nameplate kW
02-06
Motor Rated Frequency 0~599.0 by motor nameplate
02-07
Motor Auto Tuning
0: Disable
1: Static auto tuning
0
02-08
Stator Resistor Gain 0~600
by series
02-09
Rotor Resistor Gain 0~600
by series
02-10
Reserved
02-11
Reserved
02-12
Reserved
02-13
SLV Slip Compensation Gain 0~200 by series %
02-14
SLV Torque Compensation
Gain
0~200 100 %
02-15
Low Frequency Torque Gain 0~100 50 %
02-16
SLV Without Load Slip
Compensation Gain
0~200 by series %
02-17
SLV With Load Slip
Compensation Gain
0~200 150 %
02-18
SLV With Load Torque
Compensation Gain
0~200 100 %
02-19
SLV Slip Compensation Select
0: Slip Compensation 1
2: Slip Compensation 2
0