TECO L510S Series - Page 70

4-25
Group12 Digital Display & Monitor functions
No. Description Range
Factory
Setting
Unit Note
12-00
Extended Display Mode
00000 ~77777.
Each digit can be set to 0 to 7
0: Default display(frequency&parameters)
1:Output Current
2:Output Voltage
3:DC voltage
4:Temperature of Heat sink
5:PID feedback
6:Analog Signal Input. (AVI)
7:Analog Signal Input. (ACI)
00321 - *1
12-01
PID Feedback Display
format
0: Integer (xxx)
1: One decimal Place (xx.x)
2: Two Decimal Places (x.xx)
0 - *1
12-02
PID Feedback Display
Unit Setting
0: xxx--
1: xxxpb (pressure)
2: xxxfl (flow)
0 - *1
12-03
Custom Units (Line
Speed) Value
0~65535 1500/1800 RPM *1
12-04
Custom Units (Line
Speed) Display Mode
0:Drive Output Frequency is Displayed
1:Line Speed. Integer.(xxxxx)
2:Line Speed..One Decimal Place (xxxx.x)
3:Line Speed.Two Decimal Places (xxx.xx)
4:Line Speed.Three Decimal Places (xx.xxx)
0 - *1
12-05
Inputs and output
Logic status display
( S1 to S5) & RY1
S1 S2 S3 S4 S5
RY1
----- - *4
12-06
Output Power
----
0.0 kW
12-07
Motor Current
Percentage
----
0 %