TECO L510S Series - Group 13 Inspection & Maintenance functions

4-26
Group 13 Inspection & Maintenance functions
No. Description Range
Factory
Setting
unit Note
13-00
Drive Horsepower
Code
---- - - *3
13-01
Software Version ---- - - *3*4
13-02
Fault Log
(Last 3 Faults)
---- - - *3*4
13-03
Accumulated
Operation Time1 1
0~23 - hour *3
13-04
Accumulated
Operation Time1 2
0~65535 ---- day *3
13-05
Accumulated
Operation Time Mode
0: Time Under Power
1: Run Mode Time Only
0 - *3
13-06
Parameter Lock
0: Enable all Functions
1: Preset speeds 05-01~05-08 cannot be
changed
2: All Functions cannot be changed
Except for Preset speeds 05-01~05-08
3: Disable All Function
0 -
13-07
Parameter Lock Code 00000~65535 00000 -
13-08
Restore Factory
Settings
1150: Initialization (50Hz,220V/380V)
1160: Initialization (60Hz,220V/380V)
1250: Initialization (50Hz,230V/400V)
1260: Initialization (60Hz,230V/460V)
1350: Initialization (50Hz,220V/415V)
1360: Initialization (60Hz,230V/400V)
1250/1360
(Note)
-
Notes:
For built-in EMC filter models, the default setting of 13-08 is “1250”.
For without built-in EMC filter models, the default setting of 13-08 is “1360”