36
*1 Differs according to inverter capacity.
*2 Initialization (Sn-03 = 1110, 1111)
After depressing the ENTER key, input the initial value of An- , Bn- , Sn- , Cn- , (except
Sn-01, Sn-02) into NV-RAM, When the value is written in without an error, “ Entry Accepted ” is displayed.
When the value is written in with an error, “ □□**Error ” is displayed. The values of Sn-15 to -18 differ as
follows between initializations with Sn-03 = 1110 and with Sn-03 = 1111.
Multi-function
Terminal
1110
(2 Wire Sequence)
1111
(3 Wire Sequence)
Terminal 5 (Sn-15) 3* (Mufti-step speed command 1) 0 (FWD/REV run select)
Terminal 6 (Sn-16) 4* (Multi-step speed command 2) 3 (Multi-step speed reference 1)
Terminal 7 (Sn-17) 6* (Jog frequency reference) 4 (Multi-step speed reference 2)
Terminal 8 (Sn-18) 8* (External baseblock command) 6 (Jog frequency reference)
*Values have been factory-set.
**□□ Contents depend on the parameter setting items.
Sn-XX = □ □ □ □
1st digit
2nd digit
3rd digit
4th digit
To Next Page
Loading...
